Products: X-ray luminescence sorters
 
 
LS-50-05 X-ray sorter
 
Brochure LS-50-05
 
The LS-50-05 Sorter is designated for the enrichment of wet basic diamond ore and re-treatment the concentrate with grain size - 50 + 20, - 20 + 10 and - 10+5 mm.

The sorter's operation concept is based on the use of diamonds' property of luminescent under X-ray impact and on the difference of those properties with diamonds and associate luminescent minerals.

The following different analysis mode are implemented:
- with single-side placement of the X-ray tube and luminescent receivers relatively to the material flow;
- the mode conditionally labeled as «luminescent and absorption", when the X-ray tube and luminescent receptors are located on both sides of the material flow; herein, the effect of difference in X-ray absorption by diamonds and associate luminescent minerals is used;

The sorter includes a sorting machine (SM) and an automated control rack (ACR).

 
Material to be processed Wet, clean from mud and sorted materials, classified (contents of main class 85% minimum)
Material grain size classes - 50 + 20;
-20 +10 mm;
-10 + 5 mm.
Material feed and transportation system Flow-type, two treatment pass. Loading hopper (with a flange to connect to the mill's transportation system) -gravity feeder with an automatically controlled slide valve- a shaking feeder -a shaping slope chute for Pass 1 and 2 (300 mm wide) - adjustable outer divider plates for Pass 1 and 2 (concentrate-tailing) - concentrate (per each pass) and tailing channels (with flanges to connect the relevant pipelines of the mill).
Only single layer feed of material to the analysis area is allowed.
Capacity To 30 t/hr (- 50 + 20 mm)
20 t/hr (- 20 + 10 mm)
9 t/hr (- 10 + 5 mm)
X-ray:
number of tubes
mode of radiation
anode voltage
anode current
One tube per each pass.
2
Pulse type (pulse length - 0.5 ms; pulse period - 4 ms).
35 kV max.
350 mA
Detection:
Luminescent signals' receivers
number of receivers
detection channels
Single-sided material luminescent detection.
Photomultipliers (PHM)
8 (4 per each pass).
Analogue-to-digital detection system; options include operation both in amplitude-time mode and in special mode, increased selectivity, using kinetic features for luminescent (extra selection effect is ensured by luminescent-absorption analysis mode).
Ejection Pneumatic, with compressed air, by means of solenoid-operated pneumatic valves 4-channel splitter (1 valve per each channel) at each pass Channel-by-channel edjection
Recovery 98% minimum
Outward flow of material per one splitter (with maximum capacity) 0.2 kg maximum (- 50 + 20 mm)
0.15 kg (- 20 + 10 mm)
0.05 kg (- 10 + 5 mm)
Automation
Extra option (supplied after a special order): Protection system against unauthorized access to SM, material
Checking of main systems prior to start of material feed and in the course of operation (material feed is stopped if fault is detected) Sensitivity Failure indication. Monitoring and control from the concentration mill's Automated Process Checking System
Only if special smart cards are available and by commissioning.
Electric power supply 380V ± 10%;
50 Hz±2%;
7 kVA
Flow rate for transportation water (0.015 MPa) 1.8 (m³/hr) max.
Flow rate for potable quality water to cool the tubes 6 l/min max.
Flow rate for potable quality water to wash the windows of photo receptors and tube collimators (0.3 MPa) 0.4 l/min max.
Average compressed air flow rate (0.6 MPa) 0.015 m³/min
Overall dimensions (LxWxH), mass:
SM
ACR
2550×870×2580 mm;
1600 kg
765×555×1745 mm;
230 kg
Operation conditions:
ambient air temperature:
From + 10°С to + 35°С.
Relative humidity (at ambient air temperature + 25°С) SM - to 100%
ACR - to 80%